Background/Scenario
In this activity, you will configure the network with EIGRP routing for IPv6. You will also assign router IDs, configure passive interfaces, verify the network is fully converged, and display routing information using show commands.
- EIGRP for IPv6 has the same overall operation and features as EIGRP for IPv4. There are a few major differences between them:
- EIGRP for IPv6 is configured directly on the router interfaces.
- With EIGRP for IPv6, a router-ID is required on each router or the routing process does not start.
- The EIGRP for IPv6 routing process uses a shutdown feature.
Packet Tracer - Configuring Basic EIGRP with IPv6 Instructions