Error Example 3
In the figure, the 192.168.11.0/24 network can use Telnet to connect to 192.168.30.0/24, but according to company policy, this connection should not be allowed. The results of the show access-lists 130 command indicate that the permit statement has been matched.
Solution - The 192.168.11.0/24 network can use Telnet to connect to the 192.168.30.0/24 network, because the Telnet port number in statement 10 of access list 130 is listed in the wrong position in the ACL statement. Statement 10 currently denies any source packet with a port number that is equal to Telnet. To deny Telnet traffic inbound on G0/1, deny the destination port number that is equal to Telnet, for example, deny tcp any any eq telnet.